High quality Four LEDs Indicators Battery Power AC Warning Stud Finders
Delivery term:The date of payment from buyers deliver within days-
Price:
Negotiable
- minimum:
- Total supply:
-
Delivery term:
The date of payment from buyers deliver within days
-
seat:
Beijing
-
Validity to:
Long-term effective
-
Last update:
2017-12-22 05:42
-
Browse the number:
172
+
Advance Plus Trading Co. Ltd
- Contactaixin:
Contactaixin:
advanceplus(Mr.)
-
telephone:
-
Area:
Beijing
Address:4F, No. 53 Juyuanzhou, Jinshan Development District, Fuzhou, Fujian, China (350002)
- Website:
+
Model Number: ST100-03-23
Brand Name: eoutil
Key Specifications/Special Features:
ST100 Four LEDs Indicators Battery Power AC Warning Stud FindersDetecting wood and metal stud up to 3/4 in (19mm)Auto calibration stud detection4 LEDs visual and audio indicatorNet weight:67.2gSize:71.5*30.5*140mm
On/ Off
1. Squeeze sides of unit to help release clip end.
2. Slide 9V battery into compartment, terminal side first, matching (+) and (-)terminals from battery to case.
3. Replace the clip. Battery life is approximately 50 hours.
Using the detector
1. Position the unit flat against the wall.
2. Press on/off button and hold in.
3. Slowly slide unit horizontally across the wall, right or left. As you begin to approach a stud,
the Yellow LEDs will light, from bottom to top.
4. When the top Red LED is light and the beep sound, you have located the edge of the stud.Mark this spot.
5. Continue scanning beyond the marked spot until the yellow LEDs go out. Slide unit in
reverse direction to locate other edge of stud.
6. Mark this second spot. Between the two spots is the stud position.
1. Squeeze sides of unit to help release clip end.
2. Slide 9V battery into compartment, terminal side first, matching (+) and (-)terminals from battery to case.
3. Replace the clip. Battery life is approximately 50 hours.
Using the detector
1. Position the unit flat against the wall.
2. Press on/off button and hold in.
3. Slowly slide unit horizontally across the wall, right or left. As you begin to approach a stud,
the Yellow LEDs will light, from bottom to top.
4. When the top Red LED is light and the beep sound, you have located the edge of the stud.Mark this spot.
5. Continue scanning beyond the marked spot until the yellow LEDs go out. Slide unit in
reverse direction to locate other edge of stud.
6. Mark this second spot. Between the two spots is the stud position.
Shipping Information:
- FOB Port: Fuzhou
- Lead Time: 35 - 45 days
- HTS Code: 9031.80.90 90
- Dimensions per Unit: 21.6 × 13.5 × 4 Centimeters
- Weight per Unit: 0.142 Kilograms
- Units per Export Carton: 80
- Export Carton Dimensions L/W/H: 44 × 37 × 50 Centimeters
- Export Carton Weight: 11.3 Kilograms
Main Export Markets:
- Asia
- Australasia
- Central/South America
- Eastern Europe
- Mid East/Africa
- North America
- Western Europe
